Logo
Ledvance Smart+ Power Monitoring Plug (4058075522800)
EU
Ledvance Smart+

Available from:
Amazon.de
Manomano.de




Manufacturer:
Ledvance.com

Install method:
USB to Serial

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 Led_i 1
GPIO04 HLW8012 CF
GPIO05 HLWBL CF1
GPIO09 None
GPIO10 None
GPIO12 Relay 1
GPIO13 Button 1
GPIO14 HLWBL SELi
GPIO15 None
GPIO16 None
GPIO17 None
Configuration
{"NAME":"Ledvance Plug","GPIO":[0,0,0,320,2688,2656,0,0,224,32,2624,0,0,0],"FLAG":0,"BASE":18}

This device now comes with a Wi-Fi module incompatible with Tasmota

For more accurate energy consumption measurements this device requires power monitoring calibration.

Attention: I came upon a Version of this plug featuring a WB2S module featuring a Beken BK7231t chip, this is not compatible to tasmota and cannot be used.

The device is (heavily) glued and must be opened with force and glued back together. TYWE2S contacts are under the CE sign, but device has to be opened for GPIO0. Be careful when opening not to destroy the button on the PCB.

To open it, you can use a cutter knife to make a small gap around the seal at the botton, then you can use like an butter knife to pry each side open carefully, then the glue will pop a little and after doing this to all four side you can easily pull the bottom out of it

Gallery of the inside

Image